Construction products

Calls for the extension of the UKCA marking transition for construction products

Actuate UK, the leading organization in the engineering services industry, has issued a warning of serious consequences for businesses, public and commercial projects as well as domestic customers in just six months if a major issue regarding product compliance and standard marking is not resolved.

He calls for an extension of the transition period to the new provisions to avoid delays and allow all products to be tested and accredited.

The government expects that the new ‘UKCA’ brand will fully replace the established EU ‘CE’ product brand across the country by the end of this year.

The purpose of CE and UKCA markings is to show that products comply with essential health, safety and environmental protection legislation. However, the problem with the limited transition period is exacerbated by the lack of UKCA accredited bodies and the lack of available capacity in current certification bodies and product testing facilities to reliably verify that existing or new products meet UKCA criteria.

As such, if an engineering services product manufactured or imported in the UK that is to show these essential characteristics cannot display a UKCA mark by the end of 2021, this will leave manufacturers and installers, the customers and the public facing serious quality and contractual issues. In some product categories, the industry estimates that 64 years of new testing will be required, and we currently only have 7 months.

The problem affects a wide range of engineered products installed for the home and commercial sectors, and it could lead to a series of installation cancellations, delays and contractual issues for the supply chain and its customers. Members of Actuate UK are covering the entire process of planning, testing and installing these products and they fear it could cripple the industry, as it still recovers from the pandemic.

To avoid the looming crisis and help a sensible transition to UKCA marking, Actuate UK is working with others in the construction and service industries and calls on the government to continue to recognize CE marking until at least the end from 2022. Actuate UK adds that during this period, products used in Britain should be allowed to bear one or both marks.

Federation of Environmental Trade Associations (FETA) CEO Russell Beattie explained, “It’s not just that manufacturers don’t prepare for a deadline and is inextricably linked to capacity within the still developing cohort of UKCA accredited bodies. This problem is not limited to our sector either.

“As businesses attempt to rebuild after the challenges of COVID 19, the government is urged to take the pragmatic step of extending the transition period. We understand this has been done in the case of medical devices, so there is a reasonable precedent for this. ”

Tom Garrigan, technical director of the Building Services Research and Information Association (BSRIA) raises similar issues for other products. “One of the 21 directives covering products placed on the market is the Construction Products Regulation (CPR), which is divided into five AVCP (Assessment and Verification of Constancy of Performance) systems,” he said. Explain.

“There are particular issues with the AVCP 3 system, as product assessment is handled differently from other systems due to the fact that the EU Notified Body or UK Approved Body is a laboratory of test. Current arrangements require that all products bearing an existing CE mark for which testing has been carried out in the EU be retested by an approved body in the UK by 31 December 21, assuming there is one with the relevant accreditations.

“For example, there are 8 notified bodies in Europe that test heat emitters for CE marking purposes, and if we assume that our European counterparts have a similar annual sample throughput as ourselves, it is estimated that it 64 years ago new tests required in less than 7 months. A clear and urgent decision on whether to apply the UKCA mark to products is needed to give UK manufacturers and accredited bodies the time they need to prepare and comply.

Source link

Leave a Reply

Your email address will not be published. Required fields are marked *